Agilent Technologies n5181a - Page 253

Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 237
SCPI Compatibility
8656B, 8657A/B/D/J Programming Codes
Compatible Codes
8656B,
8657A/B/D/J
Codes
a
Description Equivalent SCPI Command Syntax
AM Amplitude Modulation [:SOURce]:AM[1][:DEPTh][:LINear]
<value><unit>|UP|DOWN
For additional commands, refer to, “S1, S2, or S3 used with
AM” on page 240
AO Amplitude Offset [:SOURce]:POWer[:LEVel][IMMediate]:
OFFSet <value><unit>
AP Amplitude (carrier) [:SOURce]:POWer[:LEVel][:IMMediate]
[:AMPLitude] <value><unit>
DB Unit used with the power
command
DB
DF Unit used with the power
command
DB
DM Unit used with the power
command
DBM
DN Step Down No equivalent SCPI command
EM Unit used with the power
command
EMF
FM Frequency Modulation [:SOURce]:FM[1][:DEViation] <value><unit>
For additional commands, refer to, “S1, S2, or S3 used with
FM” on page 241.
FR Frequency (carrier) [:SOURce]:FREQuency[:CW] <value><unit>
GT Flexible Sequence No equivalent SCPI command
Hz Unit used with the
frequency command
Hz
IS
b
Increment Set No equivalent SCPI command
KZ Unit used with the
frequency command
kHz
MV Unit used with the power
command
mV