File
4
OPERATOR STATIONS (OPERATOR
GROUPS)
CALL SERVER : TELEPHONE FEATURES
Ed. 04 3/6Réf. 3EH 21000 BSAA
CONFIGURATION
T Configuring the Operator Groups:
T Modifying the internal call number of the Operator Groups:
T Programming the external call number of the Operator Groups (N.B.: base identical to that of an
internal call number):
T Programming the operator profile:
T Assigning an Operator Group to each time range:
T To select the management type for Operator Groups and Hunting Groups: with ("signaling" mode)
or without ("setup" mode) the "Group Supervision" programmed key:
T To authorize the immediate group forwarding or withdrawal (see "Forwarding") of group calls from
the last member of a group (with MMC-PM5 only):
T Defining the dynamic routing parameters (see "Call distribution") for an Operator Group:
- by MMC-PM5 (Expert View): Attendant Group List
- by MMC-Station: Groups -> OpGrp
- by MMC-PM5 (Expert View): Numbering -> Internal Numbering Plan
- by MMC-Station: NumPln -> IntNum
- by MMC-PM5 (Expert View): Numbering -> Public Numbering Plan
- by MMC-Station: NumPln -> PubNum
- by MMC-PM5 (Expert view): Subscribers/Basestations List -> Subscribers/Basestations List
-> Profiles
- by MMC-Station: TerPro -> Attend
- by MMC-PM5 (Expert view): Time Ranges
- by MMC-Station: TimeRa
- by MMC-PM5 (Expert View): System Miscellaneous -> Memory Read/Write -> Misc. Labels
-> "GrpCalWSig"
- by MMC-Station:
Global -> Rd/Wr -> Address -> "GrpCalWSig" -> Return -> Memory
System Miscellaneous -> Feature Design -> "Disconnect last Group Member allowed"
- by MMC-PM5 (Expert view): Attendant Group List -> Dyn. Rout.
- by MMC-Station: Groups -> AttGrp -> DynRou
To Next Page
Loading...
