CALL DISTRIBUTION (DYNAMIC
ROUTING)
CALL SERVER : TELEPHONE FEATURES
Ed. 042/6 Réf. 3EH 21000 BSAA
- system in normal or restricted service (see "Normal / restricted service (system level)")
- dissuasion message programmed in the active Operator Group (see "Automatic welcome")
- welcome message transmitted or not (see Automatic Welcome (Pre-announcement))
- destination station directory number: programmed in the public, private numbering plan (see "In-
coming transit") or main only
- type of call: for a private subscriber or not
- station accessible or not
- destination station resource keys (see "Resource keys")
- status of the resources: free or busy (see "Resource keys")
- features active on the destination set: internal forwarding (see "Forwarding"), monitoring (see "Call
Monitoring"), filtering (see "Manager/secretary screening"), external forwarding (see "External
Forwarding")
- dynamic routing parameters programmed for a resource, the station or the hunting group
NB: the dynamic routing programming on a resource key is duplicated on all the resources of the
same type. To cancel this programming, erase all the keys of this type and re-program.
CONFIGURATION
T Configuring a "personalized" line i.e. a line with predetermined routing:
T Configuring a "reserved" line by attributing the feature "private subscriber" to the DDI number pro-
grammed for a personalized line:
- by MMC-PM5 (Expert View):
• complete the DDI numbering plan: Numbering -> Public Numbering Plan
- associate the number programmed in the DDI numbering plan with the appropriate line in
normal and/or restricted mode: External Lines -> List of Accesses -> Details -> Call-
Dist.
-by MMC-Station:
• complete the DDI numbering plan: NumPln -> PubNum
- associate the number programmed in the DDI numbering plan with the appropriate line in
normal and/or restricted mode: Access -> CalDis
- by MMC-PM5 (Expert View): Numbering -> Public Numbering Plan
-by MMC-Station: NumPln -> PubNum
To Next Page
Loading...
