File
3
SERVICES AVAILABLE TO USERSCALL SERVER : INTEGRATED VOICE
MAIL UNIT
Ed. 04 7/18Réf. 3EH 21000 BSAA
FILTERING MAIL
Description
This function enables users, with the terminal on idle, to monitor messages being left and answer a
call if desired.
Activation/deactivation
Additional information
- The set's speaker is automatically activated when the message is left.
- This function is only available for idle sets with programmable keys and a loudspeaker.
- The messages that can be filtered correspond to calls to users with fixed or dynamic routing on their
lines; messages sent from a mailbox cannot be filtered.
- The general mailbox cannot be filtered; messages sent from the "Mailbox" menu cannot be filtered.
- Filtering can only be activated for a single message at a time.
- If filtering is activated while a message is being left, there is no effect.
- The call can be answered by pressing the "Hands Free" key or going off-hook. The part of the mes-
sage left before answering is wiped. After going back on hook, filtering remains active for any new
incoming call.
Service Activation/deactivation
To activate filtering PK: VMU: Screening + Password
Deactivate filtering PK: VMU: Screening
Deactivate call monitoring PK: VMU: Screening: stops monitoring and deactivates filtering.
Fixed End key: monitoring of the filtered call is deactivated; the user
cannot replay the message currently being filtered, but filtering re-
mains active for other incoming calls, which can still be monitored.
To Next Page
Loading...
