File
4
"VISUAL MAILBOX" INTERFACECALL SERVER : INTEGRATED VOICE
MAIL UNIT
Ed. 04 3/4Réf. 3EH 21000 BSAA
MANAGING THE TERMINAL
Entering VMB mode
The terminal acts as the audio input/output for recording and playback services.
When a new voice mail is detected, the server informs the terminal (the LED flashes) and the PC (the
"Mailbox" icon changes state). Pressing the "Listen" key in the "Visual Mailbox" window has the following
effect:
- the terminal goes directly to Hands Free mode; alternatively, it rings and the user has to pick up
the receiver. The user then hears the new message.
- the display is updated ("Visual Mailbox").
- all the terminal keys except End, Loud+, Loud-, off-hook and on-hook are disabled.
- the terminal is now considered busy (incoming calls entrants are camped on); with PIMphony, calls
can still be taken.
Quitting VMB mode
The terminal quits this mode after:
- going on-hook or pressing END
- closing the VMB window
- after an inactivity timeout of 2 min 30 sec.
To Next Page
Loading...
