File
5
EXTERNAL VOICE MAIL UNITCALL SERVER : INTEGRATED VOICE
MAIL UNIT
Ed. 04 3/4Réf. 3EH 21000 BSAA
T For Reflexes terminals and analog sets with a Message LED: to create a "Voice Mail" key (virtual in
the case of analog terminals) assigned with the VMU group number:
T To adapt dynamic routing of level 1 and/or 2 (forwarding to general level): if the box is checked,
the call is forwarded to the Automated Attendant on the external VMU; otherwise it goes through
to the user's mailbox.
T To check the coherence of the internal numbering plan for the "Mail Booking" and "Cancel Mail
Booking" functions (used by the VPS protocol):
T To check the values of the other VPS codes defined by labeled addresses relative to the numbering
plan:
T To return to integrated voice server mode (check that the settings are coherent!):
- By MMC-PM5 (Expert View): Subscribers/Basestations List -> Subscribers/Basestations List
-> Details -> Keys -> Function Keys = Voice Mail Unit (or Vir. keys -> check o Voice Mail
Unit and enter the VMU group number)
- By MMC-PM5 (Expert View): Subscribers/Basestations List -> Subscribers/Basestations List
-> Details -> Dyn. Rout. -> check or uncheck o VMU as Auto. Attendant (lev 1) and/or
o VMU as Auto. Attendant (lev. 2)
- By MMC-PM5 (Expert View): Numbering -> Numbering Plans -> Internal Numbering Plan
- By MMC-PM5 (Expert View): System Miscellaneous -> Memory Read/Write -> Other labels
-> VMCodBsyTo, VMCodCall, VMCodCnsTo, VMCodDiaTo, VMCodDirCl, VMCodFwdCl,
VMCodOosTo, VMCodRecCl, VMCodRecal, VMCodRelea, VMCodRgToE, VMCodRngTo
- By MMC-PM5 (Expert View): Voice Processing -> Activate Voice Processing -> o Activate
Voice Processing
To Next Page
Loading...
Need help?
General