Alcatel OmniPCX Office Technical Documentation

File
3
CONFIGURING THE SYSTEMCALL SERVER : MOBILITY
Ed. 04 3/4Réf. 3EH 21000 BSAA
GAP AUTHENTICATION
This service secures data exchange between the system and the DECT GAP handsets.
An authentication code can be sent by the mobile to the system during the registration procedure. This
code is then compared with the one configured in the system. If it matches, the registration of the set
can continue; if not, it is stopped.
- To define an authentication code with PM5 (Expert View):
- To define an authentication code with MMC Station:
REGISTERING A GAP HANDSET
DECT sets are identified by their IPUI N (International Portable User Identity type N). Each handset has
a different IPUI N number, used when the set is declared to the system.
In the case of a DECT GAP handset, the IPUI N and ARI parameters are exchanged automatically du-
ring the registration procedure. It is through these parameters that the system recognizes the handset,
and vice versa.
Procedure with PM5
On the mobile
Procedure with MMC Station
Select: System Miscellaneous-> DECT ARI/GAP Authentication-> check o Activate GAP
Authentication -> enter a code of between 4 and 8 digits in Authentication code
Select DECT -> AuthCd -> enter a code of between 4 and 8 digits and validate by clicking OK
Select DECT -> Authen -> activate or deactivate with Choice and validate by clicking OK
Select: Subscribers/Basestations List-> Subscribers/Basestations List-> Add -> add the requi-
red number of DECT accesses by selecting DECT handsets and the number of devices, then vali-
date by clicking OK
Select Subscribers/Basestations List -> Subscribers/Basestations List -> GAP Reg. -> The
GAP registration procedure is under way when the Register GAP Handsets window appears.
Launch the registration procedure on the handset (refer to the accompanying documentation).
As soon as the mobile's IPUI number appears, select an unassigned number mobile and click Assign.
The IPUI number, preceded by the mobile number, then appears in the Assigned Handsets window

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing