Alcatel OmniPCX Office Technical Documentation

IMPLEMENTING 4073 GS SMART
HANDSETS
CALL SERVER : MOBILITY
Ed. 048/8 Réf. 3EH 21000 BSAA
IDENTITY (system identity)
System RFPI number: in hexadecimal.
System RFPI number: in octal.
QUALITY (global DECT quality)
Z:xx Number of CRC errors detected in field Z (Value measured on 120 frames and displayed in
hexadecimal).
X:xx Number of CRC errors detected in field X (Value measured on 120 frames and displayed in
hexadecimal).
A:xx Number of CRC errors detected in field A (Value measured on 120 frames and displayed in
hexadecimal).
SYNC:xx Number of synchronization errors reported by the mobile. (Value measured on 120 frames
and displayed in hexadecimal).
Transmission quality index (preceded by base station ID n°). See previous page: the index corresponds
to the number of frames received without error. There are two display modes:
- rapid measurement (on 16 frames). Obtained by briefly pressing 'Speed Dial'
- averaged measurement (on 256 frames). Obtained by a long press on 'Speed Dial'
RFPI 1e798f0f05
31171714360744
A:xx X:xx Z :xx
SYNC:xx
QUAL 01:xx

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing