TRAFFIC COUNTERS CALL SERVER : MOBILITY
Ed. 042/8 Réf. 3EH 21000 BSAA
- In MMC-PM5, the content of a traffic counter is always a hexadecimal (base 16) value encoded
over several consecutive addresses. To obtain the corresponding decimal value, the values dis-
played must be converted manually (see following examples).
- On the first initialization, during the installation startup, all the addresses corresponding to the
DECT counters contain the value zero (00 hex.). Only the addresses "position" and "device" con-
tain a fixed value other than zero at this stage.
All counters are automatically reset to zero when there is a cold system reset. It is however possible
to reset one or more base station or handset counters manually, by assigning the value 00 to the
corresponding addresses.
To Next Page
Loading...
