EasyManuals Logo

Alcatel OmniPCX Office Technical Documentation

Alcatel OmniPCX Office
964 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #578 background imageLoading...
Page #578 background image
CONFIGURATION CALL SERVER : HOTEL
Ed. 0410/18 Réf. 3EH 21000 BSAA
- a DDI n° allocated to a room at check-in automatically switches from "DDI Deallocated" to "DDI
Allocated"
- likewise, a DDI n° which is no longer assigned to a room at check- out automatically returns to its
initial function, "DDI Deallocated". This mechanism allows you to route all the DDI calls for free
rooms to the Reception set.
VisAl (DDI Allocated)
The "VisAl (DDI Allocated)" function in the DDI numbering plan adds a DDI n° to all the DDI n°s which
are reserved for rooms and assign it directly to a room.
- To add a room DDI n°:
Notas :
As the previous note states, this DDI n° will automatically switch to "DDI Deallocated" on check-out. It
will thus rejoin all the DDI n°s reserved for rooms.
- by MMC-Station: NumPln -> PubNum -> VisAl feature-> enter the DDI number in Begin and
End, enter the directory n° of the room in Base
- by MMC-PM5 (Expert View): Numbering -> Public Numbering Plan -> Guest DDI allocated
feature -> enter the DDI number in Start and End, enter the directory n° of the room in Base

Table of Contents

Other manuals for Alcatel OmniPCX Office

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel OmniPCX Office and is the answer not in the manual?

Alcatel OmniPCX Office Specifications

General IconGeneral
VoIP SupportYes
SIP SupportYes
ISDN SupportYes
Analog SupportYes
Integrated Voice MailYes
Auto AttendantYes
ConferencingYes
VoIP ProtocolsSIP, H.323
Power Supply100-240 VAC, 50/60 Hz
Network Interfaces10/100 Mbps Ethernet
Humidity10% to 90% non-condensing