File
2
CONFIGURATIONCALL SERVER : HOTEL
Ed. 04 13/18Réf. 3EH 21000 BSAA
Using the feature:
The system converts the guest's prepayment total into meter pulses (metering credit). When the mete-
ring credit reaches the value programmed in "Beep ", the system transmits a sound signal (succession
of beeps) to the guest, for each pulse received.
When the metering credit is exhausted, the communication is cut off.
Default value:
- COST1, COST2 and COST3 = 0
- THRESHOLD1 and THRESHOLD2 = 0
-OVERLOAD = 0
- BEEP THRESHOLD = 0 (no communication cut off)
PRINTING THE GUEST'S TICKET AUTOMATICALLY
The automatic print of the "Guest Information Ticket" after the guest has checked in or the "Guest Glo-
bal Bill Ticket" after check-out can be deleted.
- Inhibiting the automatic print mechanism:
Notas :
It is always possible to print the tickets manually with the hotel application.
- by MMC-Station: Meter -> Visit -> UnitTh -> assign a value (number of pulses) other than 0
to activate the mechanism in Beep
- by MMC-PM5 (Expert View): System Miscellaneous -> Hotel -> Metering -> select Cut if pre-
payment consumed to activate the mechanism, select a value (number of pulses) in Beep at
credit threshold
- by MMC-PM5 (Expert View): Admin -> Hotel -> Parameters -> deselect Print Check-In/
Check-Out Ticket
To Next Page
Loading...
Need help?
General