Alcatel OmniPCX Office Technical Documentation

THIRD PARTY CTI - TAPI APPLICATIONS
Ed. 042/4 Réf. 3EH 21000 BSAA
TAPI SERVER/CLIENT CONNECTIVITY
Microsoft TAPI 2.1 server
Various architecture solutions are available:
This architecture requires:
- Microsoft remote service provider on the client PC
- Microsoft TAPI 2.1 server and Alcatel TAPI SPI 5.0x on the server PC
- the CSTA server on Alcatel OmniPCX Office
Alcatel TAPI Server
In this case no TAPI server is required: the CPU board acts as a TAPI server. As each Alcatel TAPI SPI
5.0x requires an CSTA session, the number of clients is limited by the number of possible CSTA ses-
sions.
Alcatel OmniPCX
Office
TAPI Server
TAPI Client
IP network
TAPI interface
IP stack
Microsoft
remote SPI
for TAPI 2.1
Alcatel
TAPI
SPI
5.0x
Micro
soft
TAPI
2.1 ser
ver
TAPI interface
CSTA
Server
IP stack
Alcatel OmniPCX
Office
TAPI Client
IP network
TAPI interface
IP stack
Alcatel
TAPI SPI
5.0x
CSTA
Server

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing