File
5
CALL METERING SERVICESAPPLICATIONS
Ed. 04 13/30Réf. 3EH 21000 BSAA
MANAGING METERING TICKETS AND STATEMENTS
The system enables metering tickets and statements to be printed out.
Selecting the type of metering printout
T line-by-line statement printout or ticket printout (1 ticket per call)
Every call that meets the monitoring parameters defined for the various system terminals triggers a tic-
ket printout.
If a communication is free of charge (incoming call for example) or if an incoming call remains
unanswered, the transmitted ticket will specify the call history (ringing time, call duration, etc.).
Set monitoring
T Definition of the monitoring criteria values: cost threshold (monetary value), duration threshold
(from 0 to 99 minutes), international prefix (4 digits maximum).
T Assigning the type of monitored communications for each set (parameter to be defined set by set):
none (no monitoring) or for all communications (outgoing and incoming) or all outgoing commu-
nications with monitoring criteria active; if this is the case, define the active criteria: duration thres-
hold (in minutes), cost threshold (6 digits of which 0 to 2 are decimals) or monitored (international
prefix).
T It is also possible to assign a profile defining the applied monitoring criteria to a group of sets.
T To print out a ticket or statement if an incoming call is unanswered (default setting = no)
- By MMC-PM5 (Expert View), select: Metering -> Metering -> Printouts -> Type of Printout
- By MMC-PM5 (Expert View), select: Metering -> Metering -> Metering Options for Active
Currency-> Activation Criteria
- By MMC-PM5 (Expert View), select: Subscribers/Basestations List -> Subscribers/Basesta-
tions List -> subscriber identification -> Details -> Metering
- By MMC-PM5 (Expert View), select: Subscribers/Basestations List -> Subscribers/Basesta-
tions List -> Profiles
- By MMC-PM5 (Expert View), select: Metering -> Metering -> Printouts->check or uncheck
Print non-answered IC calls
To Next Page
Loading...
Need help?
General