CALL METERING SERVICES APPLICATIONS
Ed. 0430/30 Réf. 3EH 21000 BSAA
DSR option
This field defines the operating mode for the DSR signal:
- Always active
- Active during the call
- Inactive in release phase
DTR option
This field defines the reaction of the DTR signal:
-Normal
-Forced
RTS option
This field defines the reaction of the CTS signal when the RTS signal changes state:
- CTS tracks RTS
- RTS ignored, CTS ON
Inactivity timeout
This field defines, in 30-second increments, the period of inactivity after which the call is released.
Loopback mode
This field defines the test loopback employed:
- no loop
- loop 1 (as defined by the V54 recommendation)
- loop 2 (as defined by the V54 recommendation)
To Next Page
Loading...
