File
1
INSTALLATION PROCEDURESPM5 : SYSTEM CONFIGURATION
Ed. 04 9/10Réf. 3EH 21000 BSAA
MIGRATING AN ALCATEL OFFICE CONFIGURATION TO AN ALCATEL
OMNIPCX OFFICE CONFIGURATION
This section provides the information you need in order to carry over a maximum of configuration data
when migrating from an Alcatel Office installation to an Alcatel OmniPCX Office system; the migration
process is made easier by the 4-page Database Transformation Wizard.
Procedure
- Select PM5 -> Tools -> Database Transformation: page 1/4 Source Database Selection ap-
pears.
• In this window, you select the database saved by PCMMC PAA422. The files may be com-
pressed (*.cdb) or not (*.db).
• The destination target (the name shown in the Destination Target System field) is selected in
the PM5 -> Options -> Target Product menu.
- Restrictions: conversion from one country to another is impossible; within the same country,
however, databases can be converted from one distributor to another.
- Press Next: the format of the selected file is checked. If everything is OK, the migration process is
launched; if not, page 2/4 Transformation Results appears, indicating the state of the new da-
tabase: what was kept, what was modified, and the errors detected. If no blocking errors are de-
tected, the Next key is available.
- Press Next: a connection is established to the Alcatel OmniPCX Office system; the module, boards
and user data are all read. The external lines are brought into conformity with the boards fitted (not
the users).
- Page 3/4 Subscriber Assignment appears. Users have to be associated with physical addresses
manually. Follow these rules:
• the terminal type cannot be modified
• the Reflexes option type (V24, S0 or Z) cannot be modified
- Reflexes options can be neither created nor modified.
- Press Next: page 4/4 Assignment Results appears, listing all the elements that couldn’t be allo-
cated (for example: networks not assigned to a board, or users in excess of the authorized limits).
- Press Finish: a confirmation window opens. The elements for printing can be selected by pressing
OK ("Customer Information" and "Subscriber List" are checked by default). The Save As window
opens. After saving, clicking Yes restores the database to the Alcatel OmniPCX Office system. If
you click No, the restore is not launched and the database can be viewed off-line.
To Next Page
Loading...
Need help?
General