CONFIGURATION OF STATIONS MMC STATION
Ed. 048/18 Réf. 3EH 21000 BSAA
ROLE OF THE PROGRAMMABLE KEYS - KEYS
makes it possible to define the role of the programmable keys.
Notas :
Before performing a remote customization of a station, the station must be switched off. It is advisable
to cancel a key's current configuration before beginning a new configuration.
The display may show:
- the number (for example 01/98)
- the type of key (for example RGM)
- the rights associated with it (INS = installer)
- the current feature
- the possible parameter(s)
State the number of the key to be programmed (see location below) by pressing or by selecting
the next or previous key.
makes it possible to show the display which groups together all the functions offered. Press
the soft key corresponding to the list which contains the desired function.
Function list
Choosing
KEY FUNCTION PARAMETERS
oCback Automatic call-back request --
nCback Cancellation of an automatic
call-back request
--
Procom Protection of a call against
any intrusion
--
oIntru Intrusion --
Pgpfix Paging call by prefix --
Pgsfix Paging call by suffix --
CLIR Calling line identity secrecy --
BMdial Block mode dialling --
SubAdd Sub address --
DNDovr Override DND/Priority call --
A
KEY
A
T
B
B