File
2
CONFIGURATION OF STATIONSMMC STATION
Ed. 04 15/18Réf. 3EH 21000 BSAA
CHARACTERISTICS OF THE V24 OUTPUT OF A DIGITAL STATION -
V24PRO
(when the selected station corresponds to a V24 interface) makes it possible to define the
characteristics for the V24 option installed on a Reflexes station.
: by successively pressing this key, you can choose the transmission protocol: 108/1, 108/2,
Hayes or Dec. auto (Hayes by default).
: by successively pressing this key, you can choose the type of flow control: XON/XOFF, RTS/CTS
or without (XON/XOFF by default).
: by successively pressing this key, you can choose the transmission speed: 1200, 2400, 4800,
9600, 19200 or 57600 bits/s (9600 bits/s by default).
: by successively pressing this key, you can choose the number of significant bits: 7 or 8 (8 by
default).
: by successively pressing this key, you can choose the parity: 0, 1, even, uneven or no parity (no
parity by default).
: by successively pressing this key, you can choose the number of stop bits: 1 or 2 (1 by default).
CORDLESS DECT STATIONS - WIRLSS
(when the selected station is a DECT) makes it possible to define the parameters for DECT
stations.
makes it possible to select a permanent association to the system.
makes it possible to select a temporary association to the system ; enter the date on which the
mobile is to be automatically disconnected from the system and validate.
makes it possible to modify the IPUI value of the DECT station ; enter 14 octal digits and validate.
makes it possible to validate or inhibit a GAP DECT display.
PAGING NUMBER - PAGING
makes it possible to define the number of the paging receiver for the station concerned.
REMOTE SERVICES - SERVIC
makes it possible to define the remote service(s) accessible for the station concerned (4 ser-
vices maximum).
By successively pressing on keys to , select the authorized remote service:
A
V24PR
A
PROT
FLOW
SPEED
SIGBIT
PARITY
STPBIT
A
A
PERM
VI
IT
DI
PL
A
P
FIX
A
A
ERVI
A
ERVI1
ERVI4