Alcatel OmniPCX Office Technical Documentation

File
12
METERING CONFIGURATIONMMC STATION
Ed. 04 5/6Réf. 3EH 21000 BSAA
THRESHOLD VALUES-V24 ON-LINE METERING - PARAM2
Press .
: state the duration threshold value (in minutes).
: state the threshold value (integer value then decimal value).
: state the monitored business code.
: by successively pressing this key, you can choose whether the total cost is displayed at the end
of the call (END) or not (end).
: by successively pressing this key, you can choose whether the cost is to be displayed during the
communication (DURC) or not (durc).
: by successively pressing this key, you can choose whether the V24 metering is activated (TAX)
or not (tax).
: by successively pressing this key, you can choose whether the pulse metering statements are
to be printed (LEAS) or not (leas) on QSIG leased lines.
ON-LINE METERING COST-NUMBER OF DECIMALS-ALARM THRESHOLD
- PARAM3
Press .
: by successively pressing this key, you can choose the on-line metering cost (0 to 9 pulse me-
ters).
: by successively pressing this key, you can choose the number of decimals for the costs (0, 1 or
2).
: by successively pressing this key, you can choose whether a statement is printed or not in the
case of an untreated incoming call.
: to define the percentage of statements stored before an alarm is activated (0 to 100, 0 = no
alarm).
COMPANY NAME - COMPAN
After pressing , enter the company name (16 alphanumeric characters maximum) shown
on the statements and tickets and validate.
A
PARAM2
A
D
U
R TH
COS
T T
INTNAT
MTEND
MTDUR
ACTMET
LLEASE
A
PARAM
3
A
CSTOLM
FRTCST
ICCALL
ALATHR
A
COMPAN
A

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing