1.1 Introduction of BERTWave
1-5
1
Outline
BERT (Bit Error Rate Tester) uses PPG (Pulse Pattern Generator) and
ED (Error Detector) together.
The number of BERT channels can be selected by specifying the option.
Table 1.1.1-2 Number of BERT Channels
Option Number Number of Channels
MP2110A-011 1
MP2110A-012 2
MP2110A-014 4
In this document, multiple option names are collectively called as follows.
BERT option: MP2110A-011, MP2110A-012, and MP2110A-014
Scope option: MP2110A-021, MP2110A-022, MP2110A-023,
MP2110A-025, MP2110A-026, MP2110A-030,
MP2110A-032, MP2110A-033, MP2110A-035,
MP2110A-036, MP2110A-039, MP2110A-040,
MP2110A-042, MP2110A-043, MP2110A-045,
MP2110A-046, and MP2110A-049
When one of the following options is installed, MP2110A can generate a
trigger clock for the sampling oscilloscope from the input signal.
MP2110A-054 Clock Recovery (Electrical/Optical)
MP2110A-055 26G/53Gbaud Clock Recovery (SM Optical)
To Next Page
Loading...
