Anritsu MP2110A BERTWave - Page 423

A.3 Sampling Oscilloscope
A-27
Appendix A
Table A.3.10-2 Optical Channel Performance
Item Specifications
Data Input
Optical Input Connector Ch A, Ch B, Ch C, Ch D
Connector
FC Connector (SMF Input, MMF Input)
Fiber
SMF Input:
62.5 µm GI Multimode fiber, accepts single mode fiber (When the installed
option is other than MP2110A-x30 or x40)
Singlemode fiber (When the installed option is MP2110A-x30 or x40)
MMF Input:
62.5 µm GI Multimode fiber, accepts single mode fiber
Wavelength
SMF Input:
860 to 1650 nm (When other than MP2110A-x30 and x40 is installed)
1260 to 1650 nm (When MP2110A-x30 or x40 is installed)
MMF Input:
800 to 860 nm
Bandwidth (No
Filter)
Typical 35 GHz (SMF Input)
Typical 25 GHz (MMF Input)
Filter Response
Supports the following specifications
<NRZ standards>
100GbE/4 (25.78125 Gbit/s)
100GbE/4 FEC (27.7393 Gbit/s)
OTU4 (27.952493 Gbit/s)
32GFC (28.05 Gbit/s)
<PAM4 standards>
400GbE/8 SMF (26.5625Gbaud 13.3GHz) [D]
400GbE/8 MMF (26.5625Gbaud 12.6GHz) [D]*
1
IEEE802.3cd Draft 2.0
400GbE/8 MMF (26.5625Gbaud 11.2GHz) [D]
400GbE/8 (26.5625Gbaud 19.34GHz) [D]
400GbE/4 SMF (53.125Gbaud 26.5625GHz)[D]
400GbE/4 SMF (53.125Gbaud 38.7GHz)[D]
64GFC SMF (28.9Gbaud 14.45GHz) [D]
64GFC MMF (28.9Gbaud 12.4GHz) [D]
*1: When MP2110A-095 is installed, Coherent Eye is set and Test
pattern is set other than Variable