the second point is any point on the positive of the X-axis, and the third point is any point on the positive
semi-axis of the Y-axis. The angle formed by the three points is a right angle.
Figure 10.29 YOZ
The figure above is yOz type, the first point requires for the calibration is the origin of the coordinate system.
The second point is any point on the positive of the Y-axis, and the third point is any point on the positive
semi-axis of the Z-axis. The angle formed by the three points is a right angle.
Figure 10.30 ZOX
The figure above is zOx type, the first point requires for the calibration is the origin of the coordinate system.
The second point is any point on the positive of the Z-axis, and the third point is any point on the positive
semi-axis of the X-axis. The angle formed by the three points is a right angle.
To Next Page
