Responsibility and standard
AUBO-i5 can be combined with other equipment to form a complete machine, and itself is not complete.
The information in this manual does not cover how to design, install and operate a complete robot, nor does
it cover all peripheral equipment that can influence the safety of the complete system. The safety of installing
a complete robot is determined by how it integrated.
Integrators must follow the standards and regulations and laws of the country where the robot is installed to
perform a risk assessment for its system design and installation. Risk assessment is one of the most important
things that integrators must done. Guidance on the risk assessment process may be found in the following
standards.
• ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk
reduction.
• ISO 10218-2:2011 Robots and robotic devices - Safety requirements - Part 2: Industrial robot systems
and integration.
• RIA TR R15.306-2014 Technical Report for Industrial Robots and Robot Systems - Safety
Requirements, Task-based Risk Assessment Methodology.
• ANSI B11.0-2010 Safety of Machinery; General Requirements & Risk Assessment.
AUBO robot integrators need to fulfill but not limited to the following responsibilities:
• Comprehensive risk assessment of complete robot system;
• Make sure the whole system design and installation is correct;
• Provide training to users and personnel;
• Create operational specifications for a complete system, specify instructions for process;
• Establish appropriate safety measures;
• Use appropriate methods to eliminate or minimize all hazards to acceptable level in the final installation;
• Convey the residual risk to the users;
• Mark the logo and contact information of the integrators on the robot;
• Archive technical file
Guidance on how to find and read applicable standards and laws is provided on: www.aubo-robotics.com
All safety information contained in this manual are not considered as a guarantee for AUBO (Beijing)
Robotics Technology Co., Ltd. Even if all the safety instructions are observed, the personnel injury or
equipment damage caused by the operator is still likely to occur.
AUBO (Beijing) Robotics Technology Co., Ltd is committed to continuously improve the reliability and
performance of the product. Therefore, we reserve the right to upgrade products without notice. AUBO
(Beijing) Robotics Technology Co., Ltd seeks to ensure the accuracy and reliability of the contents in this
manual but is not responsible for any errors or omissions.
To Next Page
Loading...
