AUBO i5 - Disposal

MAINTENANCE, REPAIR AND DISPOSAL V4.3
26
©2015-2018 AUBO. All rights reserved.
1. Replace the defective components by new components with the same article number
or equivalent components approved by AUBO (Beijing) Robotics Technology Co.,
Ltd.
2. Reactivate any deactivated safety measures immediately after the work is
completed.
3. Record all maintenance operations and save in technical documentation.
4. There is no self-serviceable part in control box. If maintaining or repairing service is
required, please contact your dealer or AUBO (Beijing) Robotics Technology Co.,
Ltd.
Disposal
AUBO robot must be disposed in accordance with the applicable national laws, regulations and,
standards.