B CERTIFICATION
AUBO-i5, is certified by a third-party certification body to pass the quality management system and
sample type test. It has been confirmed that this product meets specific requirements and has the ability to
consistently produce products that meet the standard requirements and has given written certification.
Described as follows: AUBO-i5 has been tested and certified by many famous third-party international
organizations and has obtained CE certification, North American certification and KCS certification, as well
as EN ISO 13849 and EN ISO 10218. Its product safety has reached the international advanced level. AUBO-
i5 passed the robotic performance test of China National Robot Testing and Assessment Center
(headquarters).
AUBO-i5 robot is certified by SGS and passed CE certification. All
products comply with all the relevant requirements of the EU CE directive:
MD 2006/42/EC
EN ISO 10218-1:2011
EN ISO 12100：2010
EN ISO 13849-1：2015
EN 60204-1：2006+A1：2009
EN 61000-6-4:2007 +A1:2011
EN 61000-6-2:2005
IEC 60204-1(Fifth Edition)+A1:2008
AUBO-i5 robot is certified by TÜV SÜD and has been certified in North
America to meet all relevant North American certification requirements:
UL 1740：2015
NFPA 79：2015
CAN/CSAZ434：2014
ANISI/RIAR15.06：2012
To Next Page
