1. Each operator who uses the robotic system should be trained through a training
course hosted by AUBO (Beijing) Robotics Technology Co., Ltd. Users need to
make sure to fully grasp the safe and standardized operating procedures with the
robot operating qualifications. Please inquire for training details, mail to
service@aubo-robotics.com
2. Do not wear loose clothing or jewelry when working with the robot. Make sure long
hair is tied back when working with the robot.
3. When the device is running, even if the robot seems to stop, it is possible that robot
is waiting for the signal and in the upcoming action status. Even in such state, it
should be considered as the robot is in action.
4. A line should be drewed to mark the range of motion of the robot to let the operator
knows the robot’s, including the holding tools, (like mechanical hand or tools)
operating range.
5. Make sure to set security-building measures (for example, rails, ropes, or
protective screen) near the robot operating area to protect the operator and
surrounding crowd. The lock should be set as needed so that those who are not
operators cannot access the robot power supply.
6. When using the operation panel or the teach pendant, make sure to take off the
gloves in case of operational errors.
7. Pushing or pulling the robot arm (at least 700N), force the joint to move in the
emergency or abnormal condition (like a person is caught in or surrounded by a
robot). Manually move the robot arm without electric drive only for emergency, and
it may damage the joints.
To Next Page
Loading...
