AudioCodes Mediant 800 MSBG - Manipulations Ip-Inbound-Manipulation

CLI Reference Guide 104 Document #: LTRT-17940
System and VoIP Functionalities
5.14.3 manipulations ip-inbound-manipulation
This command defines the inbound manipulations table.
Syntax:
sbc manipulations ip-inbound-manipulation <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 DestHost
 DestUsernamePrefix
 IsAdditionalManipulation
 LeaveFromRight
 ManipulatedURI
 Prefix2Add
 RemoveFromLeft
 RemoveFromRight
 RequestType
 SrcHost
 SrcIPGroupID
 SrcUsernamePrefix
 Suffix2Add
 defaults
 purpose
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the number of channels associated with media services
(announcements, conferencing).
(config-voip)# sbc manipulations ip-inbound-manipulation 1
(ip-inbound-manipulation-1) # set media-channels 10