AudioCodes Mediant 800 MSBG - Redirect-Number-Map-Ip2 Tel

CLI Reference Guide 5. VoIP Commands
Version 6.4 133 January 2012
5.16.8.11 redirect-number-map-ip2tel
This command defines the redirect-number-map-ip2tel table.
Syntax:
gw manipulations redirect-number-map-ip2tel <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 DestinationPrefix
 IsPresentationRestricted
 LeaveFromRight
 NumberPlan
 Prefix2Add
 RedirectPrefix
 RemoveFromLeft
 RemoveFromRight
 SourceAddress
 Suffix2Add
 TON
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the number of digits to leave.
(config-voip)# gw manipulations redirect-number-map-ip2tel 1
(redirect-number-map-ip2tel-1)# set LeaveFromRight 5