CLI Reference Guide 5. VoIP Commands
Version 6.4 75 January 2012
5.4 qos vlan-mapping
This command displays and configures Quality of Service vlan mapping.
Syntax:
The syntax of this command includes the following variations:
qos vlan-mapping <index>
set <parameter> <value>
The command syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
defaults
diff-serv
vlan-priority
For a description of these parameters, refer to the User's Manual.
Examples:
The following example maps the DiffServ value of 46 to vlan priority 5.
(config-voip)# qos vlan-mapping 3
(vlan-mapping-3)# set diff-serv 46
(vlan-mapping-3)# set vlan-priority 5
To Next Page
Loading...
