AudioCodes Mediant 800 MSBG - Dns Dns2 Ip

CLI Reference Guide 5. VoIP Commands
Version 6.4 83 January 2012
5.9.2 dns Dns2Ip
This command defines the control-network Dns2Ip table.
Syntax:
control-network dns Dns2Ip <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 DomainName
 FirstIpAddress
 FourthIpAddress
 SecondIpAddress
 ThirdIpAddress
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the First IP address.
(config-voip)# control-network dns Dns2Ip 1
(Dns2Ip-1)# set FirstIpAddress 10.12.3.105
(Dns2Ip-1)# set ….