CLI Reference Guide 3. General Commands
Version 6.4 25 January 2012
3.6 copy firmware
This command upgrades the device’s firmware.
Syntax:
The syntax of this command can include the following variations:
copy firmware from <URL>
The command’s syntax format is described below:
Arguments Description
from Copy the firmware file from URL file source
<URL> File source URL. Can be one of: http, https, tftp or nfs.
Defaults:
NA
Notes:
Upon invoking this command:
1. The new firmware is copied and burned to the non-volatile (NV) memory of the device.
2. The current running configuration (voice and data) is saved on the NV memory as well.
3. The device automatically reloads with the new firmware.
Command Modes:
Enable
Related Commands:
copy (configuration)
Examples:
The following example upgrades the device’s firmware from a source URL file.
# copy firmware from http://www.exmaple.com/MSBG_firmware.cmp
To Next Page
Loading...
