AudioCodes Mediant 800 MSBG - Media Fax-Modem V1501

CLI Reference Guide 138 Document #: LTRT-17940
System and VoIP Functionalities
5.18.2 media fax-modem V1501
This command configures the V1501 configuration.
Syntax:
# media fax-modem V1501
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 SPRT-transport-channel0-max-payload-size
 SPRT-transport-channel2-max-payload-size
 SPRT-transport-channel2-max-window-size
 SPRT-transport-channel3-max-payload-size
 SSE-redundancy-depth
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the V.150.1 SPRT transport Channel 0 maximum payload size
to 140.
(config-voip)# media fax-modem V1501
(media-fax-modem-V1501)# set SPRT-transport-channel0-max-payload-
size 140