AudioCodes Mediant 800 MSBG - Ldap

CLI Reference Guide 5. VoIP Commands
Version 6.4 91 January 2012
5.11 ldap
This command defines the LDAP server table.
Syntax:
ldap
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 LDAPSERVERIP
 bind-dn
 defaults
 enable
 password
 search-dn
 server-domain-name
 server-max-respond-time
 server-port
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets LDAP server IP address.
(config-voip)# ldap
(ldap)# set ldapserverip 10.5.5.12