AudioCodes Mediant 800 MSBG - Show System Active-Alarms

CLI Reference Guide 6. Show Commands
Version 6.4 151 January 2012
6.1.3 show system active-alarms
This command displays the system active alarms.
Syntax:
The syntax of this command includes the following variations:
show system active-alarms
Command Modes
Enable
Examples:
# show system active-alarms
1. Board#1 14 major Network element
operational state change alarm. Operational state is disabled.
2. Board#1/WanLink#1 78 major WAN link alarm.
FE interface 1 is down.
3. Board#1/EthernetLink#2 9 minor Ethernet link
alarm. LAN port number 2 is down.
4. Board#1/EthernetLink#3 9 minor Ethernet link
alarm. LAN port number 3 is down.
5. Board#1/EthernetLink#4 9 minor Ethernet link
alarm. LAN port number 4 is down.
6. Board#1/EthernetLink#5 9 minor Ethernet link
alarm. LAN port number 5 is down.
7. Board#1/EthernetLink#6 9 minor Ethernet link
alarm. LAN port number 6 is down.
8. Board#1/EthernetLink#7 9 minor Ethernet link
alarm. LAN port number 7 is down.
9. Board#1/EthernetLink#8 9 minor Ethernet link
alarm. LAN port number 8 is down.
10. Board#1/EthernetLink#9 9 minor Ethernet link
alarm. LAN port number 9 is down.
11. Board#1/EthernetLink#10 9 minor Ethernet link
alarm. LAN port number 10 is down.
12. Board#1/EthernetLink#11 9 minor Ethernet link
alarm. LAN port number 11 is down.
13. Board#1/EthernetLink#12 9 minor Ethernet link
alarm. LAN port number 12 is down.