CLI Reference Guide 3. General Commands
Version 6.4 35 January 2012
3.12 erase
This command erases a device’s auxiliary file.
Syntax:
The syntax of this command can include the following variations:
erase <file>
The command’s syntax format is described below:
Arguments Description
<file> Defines the file name to be erased.
Defaults:
NA
Notes:
1. The file name should be copied from the ‘dir’ command output.
2. The file is being erased from RAM (and from the current device’s run usage). In order
to erase the file completely from the NV memory, a ‘write’ command should also be
issued.
Command Modes:
Enable
Related Commands:
dir, copy (auxiliary file), write
Examples:
The following example prints the directory listing of the device and then erases one of the
files.
# erase voice_prompts
To Next Page
Loading...
