AudioCodes Mediant 800 MSBG - Coders-And-Profiles Coders-Group

CLI Reference Guide 5. VoIP Commands
Version 6.4 77 January 2012
5.6 coders-and-profiles coders-group
This command defines the Coders Group table.
Syntax:
The syntax of this command includes the following variations:
coders-and-profiles coders-group-<0-4> <index>
set <parameter> <value>
The command syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 Name
 PayloadType
 Sce
 defaults
 pTime
 rate
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the Coders Group table and sets the name.
(config-voip)# coders-and-profiles coders-group-0 1
(coders-group-0-1)# set name tjones