AudioCodes Mediant 800 MSBG - Routing; Classification

CLI Reference Guide 106 Document #: LTRT-17940
System and VoIP Functionalities
5.15 routing
The following describes Routing.
5.15.1 classification
This command defines the classification table.
Syntax:
# sbc routing classification <index>
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 ActionType
 DestHost
 DestUsernamePrefix
 MessageCondition
 SrcAddress
 SrcHost
 SrcIPGroupID
 SrcPort
 SrcSRDID
 SrcTransportType
 SrcUsernamePrefix
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the Action Type to ’allow’.
(config-voip)# sbc routing classification 1
(classification-1)# set ActionType allow