AudioCodes Mediant 800 MSBG - Snmp

CLI Reference Guide 4. System Commands
Version 6.4 51 January 2012
4.8 snmp
This command enables and defines the SNMP server.
Syntax:
The syntax of this command includes the following variations:
snmp
set <parameter> <value>
Arguments Description
<parameter> <value> Sets the following parameters:
 defaults
 disable
 engine-id
 port
 ro-community-string
 rw-community-string
 snmp-acl
 sys-contact
 sys-location
 sys-name
 sys-oid
 trusted-managers
 wan-snmp-allow
For a description of these parameters, refer to the User's
Manual.
Defaults
NA
Command Modes
Enable
Examples:
This example defines the sysName as descibed in MIB-2.
(config-system)# snmp
(snmp)# set sys-name ABCD_X1