AudioCodes Mediant 800 MSBG - Advance-Application

CLI Reference Guide 110 Document #: LTRT-17940
System and VoIP Functionalities
5.16 gw
The following defines gw commands:
5.16.1 advance-application
This command defines the advance application settings.
Syntax:
# gw advance-application voice-mail-setting
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 defaults
 dig-to-ignore-dig-pattern
 disc-call-dig-ptrn
 enable-smdi
 ext-call-dig-ptrn
 fwd-bsy-dig-ptrn-ext
 fwd-bsy-dig-ptrn-int
 fwd-dnd-dig-ptrn-ext
 fwd-dnd-dig-ptrn-int
 fwd-no-ans-dig-ptrn-ext
 fwd-no-ans-dig-ptrn-int
 fwd-no-rsn-dig-ptrn-ext
 fwd-no-rsn-dig-ptrn-int
 int-call-dig-ptrn
 line-transfer-mode
 mwi-off-dig-ptrn
 mwi-on-dig-ptrn
 mwi-source-number
 mwi-suffix-pattern
 smdi-timeout-[msec]
 vm-interface
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable