AudioCodes Mediant 800 MSBG - Sourcenumbermapip2 Tel

CLI Reference Guide 5. VoIP Commands
Version 6.4 127 January 2012
5.16.8.5 SourceNumberMapIp2Tel
This command defines the SourceNumberMapIp2Tel settings.
Syntax:
gw manipulations SourceNumberMapIp2Tel <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 DestinationPrefix
 IsPresentationRestricted
 LeaveFromRight
 NumberPlan
 NumberType
 Prefix2Add
 RemoveFromLeft
 RemoveFromRight
 SourceAddress
 SourcePrefix
 Suffix2Add
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the IsPresentationRestricted to ‘Allowed’.
(config-voip)# gw manipulations SourceNumberMapIp2Tel 20
(SourceNumberMapIp2Tel-20)# set IsPresentationRestricted Allowed