AudioCodes Mediant 800 MSBG - Calling-Name-Map-Tel2 Ip

CLI Reference Guide 130 Document #: LTRT-17940
System and VoIP Functionalities
5.16.8.8 calling-name-map-tel2ip
This command defines the calling-name-map-tel2ip settings.
Syntax:
# gw manipulations calling-name-map-tel2ip <index>
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 CallingNamePrefix
 DestinationPrefix
 LeaveFromRight
 Prefix2Add
 RemoveFromLeft
 RemoveFromRight
 SourceAddress
 SourcePrefix
 Suffix2Add
 Defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the source prefix to be ‘abcd’.
(config-voip)# gw manipulations calling-name-map-tel2ip 5
(calling-name-map-tel2ip-5)# set sourceprefix abcd