AudioCodes Mediant 800 MSBG - Advanced Settings

CLI Reference Guide 96 Document #: LTRT-17940
System and VoIP Functionalities
5.13.3 advanced settings
This command defines advanced SIP settings.
Syntax:
sip-definition advanced-settings
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 set 1st-call-rbt-id
 FarEndDisconnectSilenceMethod
 FarEndDisconnectSilencePeriod
 QOSStatistics
 amd-beep-detection
 broken-connection-event-timeout
 busy-out
 call-pickup-key
 calls-cut-through
 cdr-report-level
 cdr-srvr-ip-adrr
 current-disc
 debug-level
 defaults
 delay-after-reset
 delay-b4-did-wink
 delayed-offer
 dflt-release-cse
 did-wink-enbl
 digit-delivery-2ip
 digit-delivery-2tel
 digit-pttrn-on-conn
 disc-broken-conn
 disc-on-silence-det
 e911-callback-timeout
 e911-gateway
 emerg-calls-regrt-t-out
 fax-re-routing
 filter-calls-to-ip
 graceful-bsy-out-t-out
 ip-security
 ip2ip-transfer-mode
 max-nb-of-act-calls
 media-cdr-rprt-level
 microsoft-ext
 mx-call-duration
 network-isdn-xfer