AudioCodes Mediant 800 MSBG - Ip2 Ip-Routing

CLI Reference Guide 108 Document #: LTRT-17940
System and VoIP Functionalities
5.15.3 ip2ip-routing
This command defines the ip2ip-routing table.
Syntax:
sbc routing ip2ip-routing <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 AltRouteOptions
 CostGroup
 DestAddress
 DestHost
 DestIPGroupID
 DestPort
 DestSRDID
 DestTransportType
 DestType
 DestUsernamePrefix
 MessageCondition
 SrcHost
 SrcIPGroupID
 SrcUsernamePrefix
 defaults
 request-type
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the Request Type to ‘invite’.
(config-voip)# sbc routing ip2ip-routing 1
(ip2ip-routing-1)# set request-type invite