AudioCodes Mediant 800 MSBG - Keypad-Features

CLI Reference Guide 114 Document #: LTRT-17940
System and VoIP Functionalities
5.16.2.3 keypad-features
This command defines the keypad features settings.
Syntax:
# gw analoggw keypad-features
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 KeyRejectAnonymousCall
 KeyRejectAnonymousCallDeact
 blind-transfer
 cw-act
 cw-deact
 defaults
 fwd-busy-or-no-ans
 fwd-deactivate
 fwd-dnd
 fwd-no-answer
 fwd-on-busy
 fwd-unconditional
 hotline-act
 hotline-deact
 id-restriction-act
id-restriction-deact
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the Key pad pattern for rejecting anonymous calls.
(config-voip)# gw analoggw keypad-features
(gw-analgw-keypad) # set KeyRejectAnonymousCall 2345