AudioCodes Mediant 800 MSBG - Numbermaptel2 Ip

CLI Reference Guide 126 Document #: LTRT-17940
System and VoIP Functionalities
5.16.8.4 NumberMapTel2Ip
This command defines the NumberMapTel2Ip settings.
Syntax:
gw manipulations NumberMapTel2Ip <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 DestinationPrefix
 LeaveFromRight
 Prefix2Add
 RemoveFromLeft
 RemoveFromRight
 SourcePrefix
 SrcIPGroupID
 SrcTrunkGroupID
 Suffix2Add
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the Destination Prefix.
(config-voip)# gw manipulations NumberMapTel2Ip 10
(NumberMapTel2Ip-10)# set DestinationPrefix 02