AudioCodes Mediant 800 MSBG - Mgmt-Access-List

CLI Reference Guide 4. System Commands
Version 6.4 47 January 2012
4.5 mgmt-access-list
This command adds a new IP address authorized to connect to the device's Web and
Telnet interfaces or delete all rows to allow access from any IP address.
Syntax:
The syntax of this command includes the following variations:
mgmt-access-list <index>
set <parameter> <value>
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following parameters:
 defaults
 ip-address
For a description of these parameters, refer to the User's
Manual.
Defaults
NA
Command Modes
Enable
Examples:
This example displays all mgmt-access-list configurations.
(config-system)# mgmt-access-list display
---- mgmt-access-list-0 ----
ip-address (10.4.2.2)
---- mgmt-access-list-1 ----
ip-address (10.4.2.3)
---- mgmt-access-list-2 ----
ip-address (0.0.0.0)
---- mgmt-access-list-3 ----
ip-address (0.0.0.0)
---- mgmt-access-list-4 ----
ip-address (0.0.0.0)