CLI Reference Guide 36 Document #: LTRT-17940
System and VoIP Functionalities
3.13 reload
This command reloads the device, with or without data configuration burn.
Syntax:
The syntax of this command can include the following variations:
reload without-saving
reload without-saving in <minutes>
no reload without-saving in <minutes>
The command’s syntax format is described below:
Arguments Description
without-saving Performs a restart without writing the configuration.
<minutes> Specifies a number of minutes after which the device will
restart.
Use this command before making changes to sensitive
settings; if your changes cause the device to lose
connectivity, just wait for the device to restart with the
previous working configuration.
To cancel the timed restart, use the "no" form of this
command.
Defaults:
Burns the configuration upon reload.
Notes:
1. By default, when the device is reloaded, the configuration and the auxiliary files are
burned to NV memory.
2. Activating the ‘reload’ command is equivalent to activating the ‘write’ command
followed by the ‘reload without-saving’ command.
Command Modes:
Enable
Related Commands:
Write
Examples:
The following example performs a restart without writing the configuration.
# reload without-saving
To Next Page
Loading...
