AudioCodes Mediant 800 MSBG - General-Setting

CLI Reference Guide 5. VoIP Commands
Version 6.4 131 January 2012
5.16.8.9 general-setting
This command defines the general settings.
Syntax:
# gw manipulations general-setting
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 add-ph-cntxt-as-pref
 defaults
 ip2tel-redir-reason
 tel2ip-redir-reason
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the parameter to add the phone context to src/dest phone
number as a prefix.
(config-voip)# gw manipulations general-setting
(gw-manipul-gnrl-setting)# set add-ph-cntxt-as-pref on