AudioCodes Mediant 800 MSBG - Hunt Trunk-Group-Setting

CLI Reference Guide 122 Document #: LTRT-17940
System and VoIP Functionalities
5.16.7 hunt trunk-group-setting
This command defines the trunk group settings.
Syntax:
gw hunt trunk-group-setting <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 ChannelSelectMode
 ContactUser
 GatewayName
 MWIInterrogationType
 RegistrationMode
 ServingIPGroup
 TrunkGroupId
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the Profile iD.
(config-voip)# gw hunt trunk-group-setting 18
(trunk-group-setting-18) # set gatewayname gateway1