AudioCodes Mediant 800 MSBG - Condition-Table

CLI Reference Guide 5. VoIP Commands
Version 6.4 107 January 2012
5.15.2 condition-table
This command defines the condition table.
Syntax:
# sbc routing condition-table <index>
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 condition
 description
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the description for the routing condition.
(config-voip)# sbc routing condition-table 1
(condition-table-1)# set description Maintable 1