AudioCodes Mediant 800 MSBG - Calling-Name-Map-Ip2 Tel

CLI Reference Guide 5. VoIP Commands
Version 6.4 129 January 2012
5.16.8.7 calling-name-map-ip2tel
This command defines the calling-name-map-ip2tel settings.
Syntax:
# gw manipulations calling-name-map-ip2tel <index>
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 CallingNamePrefix
 DestinationPrefix
 LeaveFromRight
 Prefix2Add
 RemoveFromLeft
 RemoveFromRight
 SourceAddress
 SourcePrefix
 Suffix2Add
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the suffix to add.
(config-voip)# gw manipulations calling-name-map-ip2tel 5
(calling-name-map-ip2tel-8)# set Suffix2Add xxyy